BenQ MP510 - Manual (Page 29)

Operation 29
Adjusting Contrast
The higher the value, the greater the contrast. Adjust this control so that white areas of the
picture appear bright and that detail in the white areas remains visible. Use this after you
have previously adjusted the Brightness setting to suit your selected input and viewing
environment.
Other adjustments
You can find other picture quality fine-tune selections in the Picture menu as well.
See "Picture menu" on page 35 for details.
A change of input will cause the projector to restore the picture settings which were current
when that input was last selected. If no custom adjustments have been made to the picture
settings of that input, the default settings for that input will be used.
Setting the presentation timer
Presentation timer can indicate the presentation time on the screen to help you achieve
better time management when giving presentations. Follow these steps to utilize this
function:
1.
Press TIMER SETUP on the remote control or go to
the Advanced > Presentation Timer menu and
press Left/ Right to display the Presentation Timer page.
2. Press Down to highlight Timer Period and decide the timer period by pressing
Left/ Right. The length of time can be set from 5 to 240 minutes in 5-minute
increments.
If the timer is already on, the timer will restart whenever the Timer Period is reset.
3. Press Down to highlight Display Timer and choose if you want the timer to show
up on the screen by pressing Left/Right .
-30 50 +70
Selection Description
Always Displays the timer on screen throughout the presentation time.
1 min/2 min/3 min Displays the timer on screen in the last 1/2/3 minute(s).
Never
Hides the timer throughout the presentation time.
Timer Activate
Timer Period
Display Timer
Timer Position
Timer Counting Direction
No
60 min.
Always
Count Up
Presentation Timer