Barco R 9849999 - Manual (Page 3)

Safety guidelines
WHO
WARNING
CAUTION
PRODUCT CARE
This installation manual must be performed by authorized technical personnel
only.
The ceiling should be capable of supporting a weight of at least 5 times the total
weight of the Ceiling Mount and Projector (i.e. at least 160 kg or 353LB). If it
cannot, the ceiling must be reinforced. Improper installation may result in serious
personal injury.
Consult a professional structural engineer prior to suspending the Ceiling Mount
from a structure not intended for that use.
Always ensure the working load limit of the structure supporting the Ceiling Mount.
Installing the Ceiling Mount should be performed only after you are thoroughly
familiar with all of the following safety checks and installation instructions.
To do otherwise increases the risk of hazards and injury to the user.
This support is designed for intended use only with Barco CLM series projectors. It
supports maximum 33 kg or 73LB. Use with any other appliance/projector may
result in instability causing possible injury.
Do not modify and/or replicate any component. Barco n.v. uses specific materials
and manufacturing processes in order to achieve part strength. Consult Barco nv
for assistance with custom applications.
Always follow Barco installation instructions. Contact Barco n.v. if you should have
any question regarding the safety of an application.
Ceiling Mount components should be kept dry, clean, lubricated (if required),
coated properly, and otherwise maintained in a manner consistent with part
design. Barco products must be used in a manner consistent with their design and
inspected on a routine basis for security, wear, deformation, corrosion and any
other circumstances that may affect the load handling capability of the part.
Barco n.v. recommends inspections at least once a year for all installations and
increasing in frequency for more critical installations. If the part is found to have
damage, which may cause a decrease in load capability, the part must be removed
from service immediately.
Under no circumstances are Barco parts repariable by anyone other than Barco
n.v.