Banner LTB OPTO-TOUCH Optical Touch Buttons - Manual (Page 3)

LTBA5
LTBA5QD
LTBA5L
LTBA5LQD
LTBB5
LTBB5QD
LTBB5L
LTBB5LQD
28455
28456
34950
35010
28457
28458
34951
35118
35119
35120
35121
35122
35123
35124
35125
35126
35127
35128
35129
35130
35131
35132
35133
35134
35135
35136
35137
35138
35139
35140
35141
35142
220/240V ac
Attached 6-foot cable Quick disconnect Lexan®
upper housing
•
120V ac
•
•
•
•
• •
• •
•
• • • • •
• •
• •
OPTO-TOUCH Optical Touch Buttons
Part Numbers - Alternate Action Models
Model
Black
Cover Red
Cover Yellow
Cover Green
Cover
•
••
•
•
Polysulfone
upper housing
OPTO-TOUCH Field Covers
!
Model shown has built-in, attached cable.
See page 2 for QD-style base.
3
A field cover has been supplied with this OTB. It should be installed, as shown in the drawing above, to minimize the
possibility of unintended switch operation. If this cover is missing or has become lost or damaged, contact Banner
immediately at (612) 544-3164 for a no-charge replacement.
Safety Instruction
OPTO-TOUCH Field Covers (see drawing, below) are designed to
prevent inadvertent activation of OPTO-TOUCHs due to objects (loose
clothing, debris, etc.) which might accidentally block the sensing beam.
Field covers are constructed of rugged polycarbonate-PET polyester blend,
which is capable of absorbing high impacts, even at low temperatures. This
material is highly resistant to abrasion and to damage by most chemicals.
Every OPTO-TOUCH is supplied with a black field cover, as standard.
Field covers are available separately in four colors, which can be used to
differentiate touch button functions when several touch buttons are in
use:
Black OTC-1-BK, p/n 30221 Yellow OTC-1-YW, p/n 30978
Red OTC-1-RD, p/n 30977 Green OTC-1-GN, p/n 30979
Lexan ® and VALOX ® are registered trademarks of General Electric Company.
Dimensions
LTB Series
Alternate Action OPTO-TOUCH
NOTE: Banner Optical Touch Buttons are manufactured and sold under license for U. S Patent #4,939,358.
Ordering Information:
OPTO-TOUCH Optical Touch Buttons are shipped with a black field cover, as standard. A black field cover
will be received if the OPTO-TOUCH is ordered by its model number (only). Red, yellow, or green field cover may be specified instead by
ordering the OPTO-TOUCH using the appropriate 5-digit part number from the table, below. Field covers may also be ordered separately (above).