Belkin ePowerSwitch - Manual (Page 9)

5
for 10Base-T networks. Once connected, it is possible to use
the ARP command to set IP address through the network
interface.
USB Connector – The USB port provides quicker setup
compared to the serial setup process. The USB driver files and
setup software are both included on the floppy. Users are
encouraged to use USB setup. (Requires English version of
Windows 98, either first or second edition)
Serial Port – The serial port on the front is designed for initial
setup of the card. Null serial cable is required for serial setup.
Your package will also contain one 3.5” diskette and a USB
cable.
One 3.5” Diskettes
Your package contains one 3.5” MIB diskette. The diskette
contains a USB device driver, USB setup software , User’s
manual, Quick installation and MIB file.