Belkin ePowerSwitch - Manual (Page 25)

21
ePowerSwitch Configuration
Each outlet can be individually programmed to enable ring
On/Off or reset. Power resume delay is convenient for
sequential startup. Name of each outlet can be labeled to
whatever you like it to be called. For example, server1, DSL
modem, webserver1, etc. Since 16 ePowerSwitches can be
daisy chained together to share one NIC, so each unit can be
individually named. The last item “Enable waiting device
shutdown” is dedicated to Microsoft Windows NT (4 and
2000, workstation and server) to have a safe shutdown. If you
installed an optional NT card inside the ePowerSwitch, there is
a delay time for the corresponding outlet of the NT card to off
the power for the safe shutdown functionality. The default delay
time is set up as 5 minutes.