Model uwg18, 18 mm wave guide accessory, Dimensions – Banner U-GAGE S18U Series—Analog User Manual
Page 2: S18u series sensors 5.0 mm inside barrel, Qs18u series sensors 5.0 mm inside barrel, 4 mm inside barrel, Warranty

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
Model UWG18-..
18 mm Wave Guide Accessory
P/N
130153 rev. A
WARRANTY:
Banner Engineering Corp. warrants its products to be free from defects for
one year. Banner Engineering Corp. will repair or replace, free of charge, any product of its
manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner
products. This warranty is in lieu of any other warranty either expressed or implied.
Construction
Acetal
Specifications
Typical Beam Patterns with Wave Guide Attached
S18U Series Sensors
5.0 mm Inside Barrel
Dimensions
“B” (see table)
43.0 mm (1.69")
Ø22.0 mm (0.87")
“A” (see table)
38.6 mm (1.52")
QS18U Series Sensors
5.0 mm Inside Barrel
Effective Beam Width
Target Distance
-5 mm
-10 mm
-15 mm
5 mm
10 mm
0
15 mm
20 mm
-20 mm
0
100 mm
(4")
200 mm
(8")
300 mm
(12")
400 mm
(16")
0.2"
-0.2"
0
0.4"
-0.4"
0.6"
0.8"
-0.6"
-0.8"
50 x 50 mm Plate
8 mm Rod
1 mm Sheet Metal
QS18U with UWG18-6.4
Effective Beam Width
Target Distance
-4 mm
-2 mm
-6 mm
-8 mm
4 mm
2 mm
6 mm
0
8 mm
10 mm
-10 mm
-0.16"
-0.08"
-0.24"
-0.32"
0.16"
0.08"
0.24"
0
0.32"
0.40"
-0.40"
0
50 mm
(2")
100 mm
(4")
150 mm
(6")
200 mm
(8")
250 mm
(10")
50 x 50 mm Plate
8 mm Rod
1 mm Sheet Metal
S18U with UWG18-6.4
Effective Beam Width
Target Distance
-5 mm
-10 mm
-15 mm
10 mm
5 mm
15 mm
0
20 mm
-20 mm
-0.2"
0
-0.4"
-0.6"
0.6"
0.4"
0.8"
0.2"
-0.8"
0
100 mm
(4")
200 mm
(8")
300 mm
(12")
400 mm
(16")
50 x 50 mm Plate
8 mm Rod
1 mm Sheet Metal
QS18U with UWG18-5.0
Effective Beam Width
Target Distance
-2 mm
-1 mm
-3 mm
-4 mm
2 mm
1 mm
3 mm
0
4 mm
5 mm
-5 mm
-0.08"
-0.04"
-0.12"
-0.16"
0.08"
0.04"
0.12"
0
0.16"
0.20"
-0.20"
0
50 mm
(2")
100 mm
(4")
150 mm
(6")
200 mm
(8")
250 mm
(12")
50 x 50 mm Plate
8 mm Rod
1 mm Sheet Metal
S18U with UWG18-5.0
6.4 mm Inside Barrel
6.4 mm Inside Barrel
Model
Inside Diameter
(“A”)
Outside Diameter
(“B”)
UWG18-5.0
5.0 mm (0.20")
7.0 mm (0.28")
UWG18-6.4
6.4 mm (0.25")
9.0 mm (0.35")