Banner A-GAGE MINI-ARRAY Series User Manual
Model masc serial cable, Model masc features, Pin connections

Model MASC Serial Cable
®
For MINI-ARRAY
™
Measuring Light Screens
Printed in USA
P/N 55216
Model MASC Features
•
This is a straight Serial cable, NOT a
Null Modem cable
•
Provides a communication path
between Personal Computer RS-232
port and MINI-ARRAY RS-232 port
• 6'
cable
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection. Doing so could lead to serious injury or death.
These sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition. Consult your current Banner Safety
Products catalog for safety products which meet OSHA, ANSI and IEC standards for personnel protection.
!
Male
Connector Pin
Female
Connector Pin
2
2
3
3
5
5
Pin Connections
Connect Male connector pins to Female
connector pins as follows:
Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 • Phone: 888.373.6767 • http://www.baneng.com • Email: [email protected]
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair or
replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period.
This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty
either expressed or implied.
5
4
3
2
1
9
8
7
6
Female connector