Banner LX Series - Manual (Page 4)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
LX Series Part-Sensing Light Screens
P/N 108865 rev. D
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering Corp. will repair
or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty
period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any
other warranty either expressed or implied.
Mounting Brackets
Accessories
Quick-Disconnect (QD) Cables
Style Model Length Dimensions Pinout
5-Pin
Euro-style,
Straight
with shield
MQDEC2-506
MQDEC2-515
MQDEC2-530
2 m (6.5')
5 m (15')
9 m (30')
5-Pin
Euro-style,
Right-Angle,
with shield
MQDEC2-506RA
MQDEC2-515RA
MQDEC2-530RA
2 m (6.5')
5 m (15')
9 m (30')
SMBLX
• End-cap brackets; set of 2
• Zinc-plated cold rolled steel
• Hardware included for mounting brackets to sensor
SMBLXR
• Back-mount bracket for secure one-end mounting
• Zinc-plated cold rolled steel
• Hardware included for mounting bracket to sensor
LX Series Lens Shields
Lens Shield
Model Number
Fits LX Series
Sensor Model
Self-adhesive polycarbonate lens shields
protect sensor lens window from impact
or weld flash. When shields are installed
on both emitter and receiver, excess gain
is reduced by 36% (max. operating range
reduces by 20%).
LXS3 LX3
LXS6 LX6
LXS9 LX9
LXS12 LX12
LXS15 LX15
LXS18 LX18
LXS21 LX21
LXS24 LX24
M12 x 1
ø15 mm
(0.6")
44 mm max.
(1.7")
38 mm max.
(1.5")
M12 x 1
ø15 mm
(0.6")
38 mm max.
(1.5")
White Wire
Blue Wire
Black Wire
Brown Wire
Gray Wire
6.4 mm
(0.25")
12.7 mm
(0.50")
6.4 mm
(0.25")
12.7 mm
( 0.50")
1.835 mm
(0.07")
39.9 mm
(1.6")
2x 3.3 mm
(0.13")
2x R 4.28 mm
(0.17")
Ø 16.2 mm
(0.64")
Ø 26.1 mm
(1.03")
38.1 mm
(1.5")
40 ° 70°
2 x 5.2 mm
(0.21")
25.4 mm
(1.00")
6.35 mm
(0.25)
23.5 mm
(0.93") 51.3 mm
(2.02")
38.1 mm
(1.5")
8.9 mm
(0.35")
15.9 mm
(0.63")
2 x 19.1 mm
(0.75")
19.1 mm
(0.75")
4 x 5.1 mm
(0.20)
4 x 6.4 mm
(0.25")
32.0 mm
(1.26")
4 x 5.2 mm
(0.205")
Ø 63.5 mm
(2.50")