Banner S18 Series - Manual

Printed in USA 10/04 P/N 116159
Installation
Guide
S18 Sensors – dc-Voltage Series
Self-contained, dc-operated sensors
WARNING . . .
Not To Be Used for Personnel Protection
Never use these products as sensing devices for personnel protection.
Doing so could lead to serious injury or death. These sensors do
NOT include the self-checking redundant circuitry necessary to allow their use in
personnel safety applications. A sensor failure or malfunction can cause either
an energized or de-energized sensor output condition. Consult your current
Banner Safety Products catalog for safety products which meet OSHA, ANSI and
IEC standards for personnel protection.
!
Additional information on this product is immediately available online at www.bannerengineering.com/116159
View or download additional information, including excess gain curves, beam patterns and accessories.
For further assistance, contact a Banner Engineering Applications Engineer at (763) 544-3164 or (888) 373-6767.
* Standard 2 m (6.5') cable models are listed.
• 9 m (30') cable: add suffix “W/30” (e.g., S186E W/30).
• 4-pin Euro-style QD models: add suffix “Q” (e.g., S186EQ). A model with a QD connector requires a
mating cable.
† Use polarized models when shiny objects will be sensed.
Sensing Mode Range LED Output Model*
Opposed
20 m
(66')
Infrared
950 nm
– S186E
NPN S18SN6R
PNP S18SP6R
Retro-
reflective †
2 m
(79")
NPN S18SN6L
PNP S18SP6L
Polarized
Retro-
reflective †
Visible
Red
680 nm
NPN S18SN6LP
PNP S18SP6LP
Diffuse
100 mm
(4")
Infrared
880 nm
NPN S18SN6D
PNP S18SP6D
300 mm
(12")
NPN S18SN6DL
PNP S18SP6DL
Fixed
Field
25 mm (1")
cutoff
NPN S18SN6FF25
PNP S18SP6FF25
50 mm (2")
cutoff
NPN S18SN6FF50
PNP S18SP6FF50
100 mm (4")
cutoff
NPN S18SN6FF100
PNP S18SP6FF100
Dimensions
78.0 mm*
(3.07")
37.0 mm
(1.46")
Yellow LED
Output Indicator
Jam Nuts
(2 Provided)
18 x 1 mm
Thread
Green LED
Power Indicator
*Polarized retro and fixed-field models = 83.8 mm (3.30")
Cabled Models QD Models
59.2 mm*
(2.33")
Yellow LED
Output Indicator
37.0 mm
(1.46")
Jam Nuts
(2 Provided)
18 x 1 mm
Thread
2 m
(6.5') Cable
Green LED
Power Indicator
*Polarized retro and fixed-field models = 65.0 mm (2.56")
P
LISTED
R
bn
bu
wh
bk
+
10 - 30V dc
–
Load
Load
Cabled Emitters
bu
bn
wh
bk
10 - 30V dc
Load
Alarm
+
–
bn
bu 10-30V dc
+
–
NPN (Sinking) Outputs
Standard Hookup
10 - 30V dc
No Connection
bu
bk
bn
wh
+
–
PNP (Sourcing) Outputs
Standard Hookup
QD Emitters
Alarm Hookup
Alarm Hookup
bu
bn
wh
bk
+
10 - 30V dc
–
Load
Load
bn
bu
wh
bk
10 - 30V dc
Load
Alarm
+
–
NOTE: QD hookups are functionally identical.