Banner K50FL Multi-Function EZ-LIGHT - Manual (Page 2)

Specifications
Supply Voltage and Current
18 to 30V dc @ 50 mA max.
Indicators
Entire translucent diffuser or dome provides indication.
LEDs are independently selected: Green, Red, Yellow,
or Blue; ON steady or flashing, alternating or rotating
Input Response Time
Indicator ON: 250 ms max.; Indicator OFF: 10 ms max.
Indicator Flash Rate
1-Color: 1-second flash rate (500 ms ON)
2- and 4-Color Flash: 500 ms per color
Connections
5-pin Euro-style integral QD (Q), 150 mm (6") PVC pig-
tail QD (QP), or 5-wire, 2 m (6.5') integral cable, de-
pending on model.
K80L models: terminal-wired models available for use
with bulk cable. Optional ½-14 NPSM cord grip model
BWA-CG.5-1.
Construction
See Models table
Operating Conditions
−40° to +50° C (−40° to +122° F)
Environmental Rating
K50L and K50FL models: fully encapsulated, rated IEC
IP67and IP69K, per DIN 40050-9. Cabled models also
meet IP69K if the cable and cable entrance are protec-
ted from high-pressure spray.
K80L models: IEC IP67 (encapsulated electronics)
Certifications
Dimensions
K50L K80L
50.0 mm
(1.97")
38 mm (1.50")*
20 mm (0.79")
11 mm (0.43")
M30 x 1.5
(mounting nut
included)
Internal Threads
½ - 14 NPSM
Max. Torque 4.5 Nm
(40 in-lbf)
Max. Torque 2.25 Nm
(20 in-lbf)
109.5 mm
(4.31")
80.8 mm
(3.18")
66.3 mm
(2.61")
26.0 mm
(1.02")
M12 X 1
65.0 mm
(2.56")
65.0 mm
(2.56")
4X 8–32 UNC
Max. Torque 1.12 Nm (10 in–lbf)
4X Ø 5.5 mm (Ø 0.22")
Max. Torque 1.12 Nm (10 in–lbf)
with supplied screws
Internal Threads ½ - 14 NPSM
Max. Torque 2.25 Nm (20 in–lbf)
K50FL
60.0
[2.36"]
35.0
[1.38"]
16.0 [0.63"]
40.0 [1.58"]
2x 5.0 [0.20"]
2x 5.0 [0.20"]
2x 5.5 [0.21"]
Ø50 [1.97"]
17.0 [0.67"]
44.6 [1.76"]
EZ-LIGHT™ Indicators — 4-Color, Multi-Function
2 www.bannerengineering.com - tel: 763-544-3164 P/N 137329 rev. C