Behringer SRC2000 - Manual (Page 23)

23
E
7. SPECIFICATIONS
Digital Input 1
Type XLR, transformer-balanced
Standard AES/EBU
Impedance 110 Ohm
Nominal Input Level 0.2 V ~ 10 V peak-to-peak
Digital Input 2
Type RCA, transformer-balanced
Standard SPDIF
Impedance 75 Ohm
Nominal Input Level 0.15 V ~ 10 V peak-to-peak
Digital Input 3
Type TOSLINK, optical light conductor
Standard SPDIF
Sync Input
Type BNC
Standard Wordclock (1 x SF)
Impedance 50 kOhm
Nominal Input Level 2 V ~ 10 V peak-to-peak
Digital Output 1
Type XLR, transformer-balanced
Standard AES/EBU
Impedance 110 Ohm balanced
Nominal Output Level 5 V peak-to-peak
Digital Output 2
Type RCA, transformer-balanced
Standard SPDIF
Impedance 75 Ohm
Nominal Output Level 0.5 V peak-to-peak
Digital Output 3
Type TOSLINK, optical light conductor
Standard SPDIF
Jittering Suppression
Jittering tolerance at the inputs > 40 ns
Self-produced output jittering < 2 ns
Self-produced jittering (external sync) < 20 ns, (typically10 ns)
Channel status information on the output signal
Professional Mode Professional, Audio Use, Stereo, No Emphasis or 50/15 µs,
Fs=32 kHz or 44.1 kHz
Consumer Mode Consumer, Audio Use, 2-Channel, Digital Audio Tape, Original
Material, Copy Permit, No Emphasis or 50/15 µs,
Fs=32 kHz or 44.1 kHz
Power Consumption
Mains Voltages USA/Canada ~ 120 V AC, 60 Hz
U.K./Australia ~ 240 V AC, 50 Hz
Europe ~ 230 V AC, 50 Hz
General Export Model ~ 100-120 V AC, ~ 200-240 V AC, 50-60 Hz
Fuse 100-120 V AC: 100 mA (slow-blow)
200-240 V AC: 50 mA (slow-blow)
Power Consumption 10 Watts
Mains Connection Standard IEC receptacle
7. SPECIFICATIONS