Behringer SRC2000 - Manual (Page 10)

10
+
Note: The ADAT multi-track format is not supported by the ULTRAMATCH and is therefore
neither passed through nor converted (ADAT is a registrated trademark of Alesis Corp.).
2.2.4 Wordclock (BNC)
The BNC jack on the rear panel allows to connect the ULTRAMATCH to a wordclock source for synchroniza-
tion purposes (s. a. 3.3.4). Wordclock signals are normally distributed in network technology, i. e. they are
passed through with BNC-T adapters and terminated with appropriate resistor elements. In order to provide
maximum flexibility, the BNC input of the ULTRAMATCH features a high-impedance resistor and is not equipped
with the normal terminal resistor (75 Ohm).
2. THE CONCEPT