Banner T18 Series - Manual (Page 6)

Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN USA 55441 • Phone: 763.544.3164 • www.bannerengineering.com • Email: [email protected]
T18 Sensors — dc-Voltage Series
WARRANTY: Banner Engineering Corp. warrants its products to be free from defects for one year. Banner Engineering
Corp. will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned
to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of
Banner products. This warranty is in lieu of any other warranty either expressed or implied.
P/N 121526 rev. A
Dimensions
Quick-Disconnect (QD) Cordsets
Style Model Length Dimensions Pinout
4-pin
Euro-style
Straight
MQDC-406
MQDC-415
MQDC-430 2 m (6.5')
5 m (15')
9 m (30')
M12 x 1
ø 15 mm
(0.6")
44 mm max.
(1.7")
4-Pin Euro
2
3
4
1
4-pin
Euro-style
Right-angle
MQDC-406RA
MQDC-415RA
MQDC-430RA 2 m (6.5')
5 m (15')
9 m (30')
38 mm max.
(1.5")
M12 x 1
ø 15 mm
(0.6")
38 mm max.
(1.5")
41.5 mm
(1.64")
ø 30.0 mm
(1.18")
Jam Nut
(Supplied)
11.5 mm
(0.45")
M18 x 1
Thread
ø 15 mm
(0.59")
30.0 mm
(1.18")
Green LED
Power Indicator
Yellow LED
Output Indicator
66.5 mm
(2.62")
ø 30.0 mm
(1.18")
Single-turn
Sensitivity (Gain) Control
(D and L Models)
Cabled Models
Cabled Emitters NPN (Sinking) Outputs - Standard Hookup PNP (Sourcing) Outputs - Standard Hookup
Alarm Hookup
NOTE: QD hookups are functionally identical.
QD Models
Hookups
Alarm Hookup
10-30V dc
–
+
3
1
Wire Key
1 = Brown
2 = White
3 = Blue
4 = Black
3
1
4
2
10-30V dc
–
+
Load
Load
3
1
4
2
10-30V dc
–
+
Load
Load
3
1
4
2
10-30V dc
–
+
Alarm
Load
3
1
4
2
10-30V dc
–
+
Alarm
Load
QD and cabled emitter hookups are functionally
identical; black and white wires have no connection.