Banner D10 Series - Manual (Page 9)

P/N 64154 rev. F
9
D10 Expert
™
Dual Discrete Outputs
Banner Engineering Corp. • Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Manual Adjust
Manual Adjust is used during RUN mode and is accomplished via the push buttons only. Its behavior depends on whether a switching threshold
or a sensing window is used.
Switching Threshold:
• Fine-tunes sensing sensitivity
• Press “+” to increase; press “-” to decrease
Sensing Window:
• Adjusts sensing window size (tolerance) for the single-point target condition
• Press “+” to increase; press “-” to decrease
Push Button Remote Result
Manual
Adjust
• Click “+” to increase,
or click “-” to
decrease. • Not available with remote
programming.
• Display briefly flashes
the threshold setpoint
value as it is being changed.
or
• Display flashes “inc”
or “dec” as the window size
is adjusted.
dynamic
static
dynamic static
dynamic static
dynamic static
or
or