Banner K50L Independent Push Button Contact User Manual
Ez-light™ indicators — daylight visible, Models, Dc-operated indicators for outdoor applications

DC-Operated Indicators for Outdoor Applications
.
• Intense levels of light output for outdoor applications
• Controlled field of view for signage and narrow lane use
• May also be used for low-cost vision sensor illumination
• Rugged, cost-effective and easy to install
• Compact devices are completely self-contained — no controller needed
• Up to three colors in one housing
• Immune to ambient light, EMI and RFI interference
• 50 mm diameter with flat profile and 30 mm mounting base
• PNP (sourcing) or NPN (sinking) input type, depending on model
• 15 to 30V dc operation
QPMA
EU
R
O
-S
TY
LE
• PIGTAIL • PU
R •
CA
B
LE
CALL FACTORY
Contact Factory for more information
Models
NOTE: Optional sun shield model K50DS is available for enhanced visibility in desert sun brightness levels
(see
Model*
LED Function**
Inputs‡
K50LDGRYPQ
3 Color:
Green, Red, Yellow
PNP
K50LDGRYNQ
NPN
K50LDGRBPQ
3 Color:
Green, Red, Blue
PNP
K50LDGRBNQ
NPN
Model*
LED Function**
Inputs‡
K50LDXGXPQ
1 Color: Green
PNP/NPN
K50LDXRXPQ
1 Color: Red
PNP/NPN
K50LDXYXPQ
1 Color: Yellow
PNP/NPN
K50LDXWXPQ
1 Color: White
PNP/NPN
K50LDXBXPQ
1 Color: Blue
PNP/NPN
* Integral QD models only are listed.
• For 150 mm PVC pigtail with QD, replace Q with QP in model number (example, K50LDGRYPQP).
• For 2 m (6.5’) cable, omit suffix Q from model number (example, K50LDGRYP).
• A model with a QD requires a mating cable (see
on page 4).
** 3-color models: 6 LEDs per color
1-color models: 18 LEDs per color
Contact factory for other colors and color combinations.
‡ 1-color models are PNP/NPN selectable, depending on hookup.
WARNING: Not To Be Used for Personnel Protection
Never use this product as a sensing device for personnel protection. Doing so could lead to serious injury
or death. This product does NOT include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A sensor failure or malfunction can cause either an energized or de-ener-
gized sensor output condition.
EZ-LIGHT™ Indicators — Daylight Visible
P/N 137330 rev. B
3/22/2011
0 137330
7