Banner WORLD-BEAM QS18 Standard Series - Manual (Page 3)

Dimensions
31.0 mm †
(1.22")
3.0 mm
(0.12")
† CV Models:
33.2 mm (1.31")
Model Suffix FP
QS18...FP Fiber Installation
15.0 mm
(0.59")
7.5 mm
(0.30")
13.4 mm
(0.53")
7.6 mm
(0.30")
17.1 mm
(0.67")
27.5 mm
(1.09")
5.2 mm
(0.21")
*Model Suffix Q7 *Model Suffix Q8 *Model Suffix Q
(e.g. QS186EQ)
*Model Suffix Q5
(e.g. QS186EQ5) (e.g. QS186EQ7) (e.g. QS186EQ8)
A
B
C
A. Slide the fiber clip to open.
B. Insert fiber ends into each port,
as far as they will go.
C. Slide the fiber clip closed,
locking fibers into position.
Model Suffix F
17.1 mm
(0.67")
36.9 mm
(1.45")
19.8 mm
(0.78")
Slot for
Fiber Clip
15.0 mm
(0.59")
31.0 mm
(1.22")
3.0 mm
(0.12")
17.1 mm
(0.67")
24.1 mm
(0.95")
35.0 mm
(1.38")
Yellow
LED
Green
LED
3.0 mm
(0.12")
21.1 mm
(0.82")
3.0 mm
(0.12")
21.1 mm
(0.82")
150 mm (6")
Pico-style
Pigtail
150 mm (6")
Euro-style
Pigtail
41.5 mm
(1.63")
49 mm
(1.93")
Integral
4-pin
Pico-Style QD
Integral
4-pin
Euro-Style QD
Single-turn
Sensitivity
Adjustment
Ø3.3 mm (0.13")
Max. torque 0.9 Nm (8 lbf. in)
M18x1 Thread
Max. torque 2.3 Nm (20 lbf. in)
8.0 mm(0.32")
24.2 mm(0.95") Packing List
Sensor
M18 x 1 jam nut
M3 hardware packet
Installation sheet P/N 63687 M3 Hardware Packet Contents:
2 – M3 x 0.5 x 20 mm SS screw
2 – M3 x 0.5 SS hex nut
2 – M3 SS washer
Model Suffix DB, W Model Suffix EB, RB Model Suffix E, EV, R, FF
Model Suffix CV15, CV45, D, LV, LP
M18 x 1 Jam Nut
Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following the date of shipment. Banner Engineering Corp.
will repair or replace, free of charge, any product of its manufacture which, at the time it is returned to the factory, is found to have been defective during the warranty
period. This warranty does not cover damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
THIS LIMITED WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS OR IMPLIED (INCLUDING, WITHOUT LIMITATION,
ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), AND WHETHER ARISING UNDER COURSE OF PERFORMANCE,
COURSE OF DEALING OR TRADE USAGE.
This Warranty is exclusive and limited to repair or, at the discretion of Banner Engineering Corp., replacement. IN NO EVENT SHALL BANNER ENGINEERING CORP. BE
LIABLE TO BUYER OR ANY OTHER PERSON OR ENTITY FOR ANY EXTRA COSTS, EXPENSES, LOSSES, LOSS OF PROFITS, OR ANY INCIDENTAL, CONSE-
QUENTIAL OR SPECIAL DAMAGES RESULTING FROM ANY PRODUCT DEFECT OR FROM THE USE OR INABILITY TO USE THE PRODUCT, WHETHER ARIS-
ING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE.
Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product
previously manufactured by Banner Engineering Corp.
WORLD-BEAM® QS18
www.bannerengineering.com - tel: 763-544-3164