Pression (msm (2-9) and mcs (2-10) – Metrohm 850 Professional IC Anion MCS Prep 1 User Manual
Page 23
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 Installation
850 Professional IC – Anion – MCS – Prep 1
￭￭￭￭￭￭￭￭
13
3
High pressure pump
See Chapter 2.10.
4
Purge valve
See Chapter 2.10.1.
5
Inline filter
See Chapter 2.11.
6
Pulsation damper
See Chapter 2.12.
7
Injection valve
See Chapter 2.14.
8
Separation column
See Chapter 2.22.
When a guard column (see Chapter 2.21,
page 64) is used, it is installed between
injection valve and separation column.
9
10 MCS
11 Detector
12 Eluent output
Connection to the waste container.
13 Sample input
Connection to the sample vessel (single ves-
sel or sample changer).
14 Dialysis cell
Is not included in the scope of delivery of
the 2.850.2110. Can be ordered as optional
accessories (as individual cell or with equip-
ment).
15 Sample output
16 Sample degasser
See Chapter 2.13. Use optional.
17 Acceptor solution inlet
Connection with the acceptor solution con-
tainer.
18 Peristaltic pump
Pumps the acceptor solution. See Chapter
2.17.
19 Acceptor solution outlet
Connection to the waste container.
20 Peristaltic pump
21 Regeneration solution input
Connection to the regeneration solution
bottle.
22 Regeneration solution output
Connection to the waste container.
23 Rinsing solution input
Connection to the rinsing solution bottle.
24 Rinsing solution output
Connection to the waste container.
Ultrafiltration
This inline sample preparation technology is used for samples containing
disruptive particles. These are removed during ultrafiltration, thus prevent-
ing damage to the separation column.
A more detailed description of the functionality of dialysis can be obtained
from the documentation to the IC equipment for ultrafiltration
(6.5330.010).