Metrohm 859 Titrotherm - Manual (Page 15)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Overview of the instrument
859 Titrotherm ￭￭￭￭￭￭￭￭ 7
2 Overview of the instrument
1
Figure 2 Front 859 Titrotherm
1 LED "On"
Lights up when the device and a computer
are connected to the mains and switched
on.
1
2
3 4 5 6
Figure 3 Rear 859 Titrotherm
1 Measuring interface: T-Port 1 and 2
For connecting two Thermoprobes. 2 USB connector (USB 1 and USB 2)
USB ports (type A) for connecting printer,
keyboard, barcode reader, additional Titran-
dos, USB Sample Processor, etc.
3 Controller connector (Controller)
Connector for a PC with installed PC soft-
ware. Mini DIN, 9-pin. 4 MSB connector (MSB 1 to MSB 4)
Metrohm Serial Bus. For connecting external
dosing devices, stirrers or Remote Boxes.
Mini DIN, 9-pin.
5 Mains connection socket 6 Type plate
Contains specifications concerning mains
voltage, instrument type and serial number.