Metrohm TitrIC 2 - Manual (Page 5)

Application Bulletin 286 e
Installation Instructions of TitrIC 2
Page 5/16
3 Cable connections
The numbers given here ( ) refer to the drawing on the next page.
First all the power cables are connected to the instruments. Both the instruments and the PC remain
switched off.
USB cable from Edgeport to PC – supplied with USB Converter Edgeport/4 (2.145.0320)
RS cable (6.2125.110) from 712 Conductometer to Edgeport port 1
RS cable (6.2134.100) from 2.861.0020 IC to Edgeport port 2 – supplied with 861
RS cable (6.2134.100) from 2.861.0010 IC to Edgeport port 3 – supplied with 861
USB cable (6.2151.000) from PC to 855 Controller – supplied with 855, do not connect!
MSB cable from Dosino 800, 20 mL (0.1M HCl) to 855 MSB 1, do not connect!
MSB cable from Dosino 800, 10 mL (cations) to 855 MSB 3, do not connect!
MSB cable from Dosino 800, 50 mL (anions) to 855 MSB 2, do not connect!