Metrohm 849 Level Control - Manual (Page 15)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Overview of the instrument
849 Level Control ￭￭￭￭￭￭￭￭ 7
2.1.3 6.1113.110 sensor for ultra pure water
The 6.1113.110 sensor can be used for monitoring fluid levels in storage
or waste containers (e.g. in chromatography). It is specially suitable for
conductivity measurements in aqueous media with low conductivity.
E F
Figure 5 6.1113.110 sensor
The sensor rods are comprised of high-purity graphite and are resistant
against the most common solvents. Predefined breaking points enable
easy shortening of the rods to the lengths suitable for various container
sizes.
Two pre-mounted tubes with M6 connector enable the aspiration and fill-
ing of the container.
Dimensions:
￭ Overall length 26.7 cm
￭ Rod length 25.2/7.9 cm
￭ Diameter 8.0 mm