Metrohm 849 Level Control - Manual (Page 13)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭ 2 Overview of the instrument
849 Level Control ￭￭￭￭￭￭￭￭ 5
2 Overview of the instrument
1 2 3 4
Figure 1 Front 849 Level Control
1 Sensor connector 1 for overflow moni-
toring (Level Full)
Signal at contact 2 Sensor connector 2 for overflow moni-
toring (Level Full)
Signal at contact
3 Sensor connector 1 for empty level
monitoring (Level Empty)
Signal at contact loss 4 Sensor connector 2 for empty level
monitoring (Level Empty)
Signal at contact loss
The connectors for the sensor cables (6.2151.060) are located on the
front of the 849 Level Control.
1
Figure 2 Rear 849 Level Control
1 Remote connector
For the 6.2125.090 cable
The 6.2125.090 connection cable providing power supply for the conduc-
tivity measurement is connected on the rear. It is connected to the remote
socket of a suitable Metrohm instrument in order to transmit the activat-
ing signals of the sensors