Metrohm 930 Compact IC Flex SeS User Manual
930 compact ic flex
Table of contents
Document Outline
- Table of contents
- Table of figures
- 1 Introduction
- 2 Overview of the instrument
- 3 Installation
- 3.1 Setting up the instrument
- 3.2 Capillary connections in the IC system
- 3.3 Removing transport locking screws
- 3.4 Connecting the drainage tubing and leak sensor
- 3.5 Connecting the eluent bottle
- 3.6 Installing the high-pressure pump
- 3.7 Installing an inline filter
- 3.8 Installing the pulsation absorber
- 3.9 Injection valve
- 3.10 Suppressor
- 3.11 Metrohm CO2 Suppressor (MCS)
- 3.12 Installing the detector
- 3.13 Connecting the instrument to a computer
- 3.14 Connecting the instrument to the power supply
- 3.15 Initial start-up
- 3.16 Connecting and rinsing the guard column
- 3.17 Connecting the separation column
- 3.18 Conditioning
- 4 Operation
- 5 Operation and maintenance
- 5.1 IC system
- 5.2 Capillary connections
- 5.3 Servicing the door
- 5.4 Handling the eluent
- 5.5 Notes on operating the high-pressure pump
- 5.6 Servicing the high-pressure pump
- 5.7 Servicing the inline filter
- 5.8 Servicing the pulsation absorber
- 5.9 Injection valve
- 5.10 Suppressor
- 5.11 Servicing the Metrohm CO2 Suppressor (MCS)
- 5.12 Servicing the detector
- 5.13 Rinsing the sample path
- 5.14 Separation column
- 5.15 Quality Management and qualification with Metrohm
- 6 Troubleshooting
- 7 Technical specifications
- 8 Warranty (guarantee)
- 9 Accessories
- Index