Metrohm Wall-Jet-Cell - Manual (Page 22)

5.2 Maintenance
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
16 ￭￭￭￭￭￭￭￭
IC equipment Wall-Jet cell
￭ The measuring cell has been removed from the detector.
￭ The electrode cables have been removed.
To disassemble the measuring cell, you need a 2.5 mm hex key.
1
2
3
4
Figure 4 Disassembling the measuring cell
1 Fastening screw (4x) 2 Base part
3 Spacer
6.1257.810 or 6.1257.830. 4 Measuring part
With auxiliary electrode.
1 Remove the reference electrode.
2 Remove the working electrode.
3 Unscrew the four screws on the base part of the measuring cell with
the hex key and remove them.
4 Remove the base part.
5 Remove the spacer.
Replace the spacer as follows: