Metrohm Wall-Jet-Cell - Manual (Page 12)

3.2 Inserting the reference electrode
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 ￭￭￭￭￭￭￭￭
IC equipment Wall-Jet cell
3.2 Inserting the reference electrode
The measuring cell is supplied without electrodes. The reference electrode
is either included in your equipment or you have ordered it separately.
Insert the reference electrode as follows:
Inserting the reference electrode
The reference electrode itself and one sealing ring are contained in the
packaging for the reference electrode.
1 Slide the sealing ring over the reference electrode.
2 Unscrew the fastening screw on the RE connector and remove it.
3 Insert the reference electrode into the opening with the flat side fac-
ing downward.
4 Retighten the fastening screw.
Special case: Ag/AgCl reference electrode
The Ag/AgCl reference electrode (6.1257.720) is, in contrast to the other
reference electrodes, permanently connected to the reference electrode
cable.