Metrohm Wall-Jet-Cell - Manual (Page 16)

3.4 Connecting the electrode cables
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
10 ￭￭￭￭￭￭￭￭
IC equipment Wall-Jet cell
NOTE
This capillary must be tested with the IC instrument the first time
the detector is put into operation, see the chapter "Start-up" in
the manual for the detector.
3.4 Connecting the electrode cables
CAUTION
The electrode cables may not be plugged or unplugged unless the mea-
suring cell is switched off in the software.
NOTE
The sockets and the plugs of the cables must be clean and dry.
Connecting the electrode cables to the detector
Prerequisites:
￭ The measuring cell is switched off.
1 Plug the straight plug of the working electrode cable (red sleeve) into
the WE socket of the detector.
2 Plug the straight plug of the reference electrode cable (black sleeve)
into the RE socket of the detector.
3 Plug the straight plug of the auxiliary electrode cable (blue sleeve)
into the AE socket of the detector.