Metrohm 940 Professional IC Vario ONE/ChS/HPG - Manual (Page 38)

3.13 Suppressor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
30 ￭￭￭￭￭￭￭￭
940 Professional IC Vario ONE/ChS/HPG (2.940.1240)
3.13 Suppressor
The suppressor drive of the 940 Professional IC Vario can hold various
rotors. The large rotors such as the SPM Rotor A (6.2835.000) and the
MSM-HC Rotor A (6.2842.000) can be inserted directly.
Small rotors like the MSM Rotor A (6.2832.000) and the MSM-LC Rotor A
(6.2844.000) must first be fitted into the adapter (6.2842.020) which can
then be inserted into the suppressor housing.
A connecting piece (6.2835.010) is used for all rotors for connecting the
suppressor to the IC system.
NOTE
The instruments are supplied without rotor and without adapter.
The suitable rotor and the adapter, if required, must be ordered sepa-
rately.
3.13.1 Inserting the rotors
Accessories For this step you need the following accessories:
￭ For the suppression: MSM Rotor A (6.2832.000) or MSM-HC Rotor A
(6.2842.000) or MSM-LC Rotor A (6.2844.000)
￭ Optional: Adapter (6.2842.020)
￭ Connecting piece (6.2835.010)
Large rotors can be directly inserted into the rotor housing.