Dulce Systems HD Commander - Manual (Page 12)

Page 22
HD Commander Installation and User’s Manual
5.1.2. Create a New RAID Set
Select the two free disks on the left side drive list and drag them into the list box,
click on RAID tab at the top, change RAID Set Name as desired, change RAID
Type to Striped RAID Set, click on Create on lower right.
The drive will appear on the desktop after successful completion of the Partition.
5.1.3. Change the Icon
Disk Utility uses a generic default icon for the drives, this can be changed to the
cooler looking Dulce icon. Visit our download page to get the icons and
instructions.
TO
www.dulcesystems.com/download
Page 23
HD Commander Installation and User’s Manual
5.2. Windows XP / Vista Formatting
Start Disk Management (can be found at Control Panel > System and
Maintenance > Administrative Tools > Computer Management. Under
Storage.)
If the Initialize and Convert Disk Wizard starts, select the two disks to initialize
them and then to convert them to Dynamic Disks.
To stripe the two disks: Point to Unallocated of Disk 1, right click > New Volume
> Next. Select Stripe > Next. Select and add Disk 2 > Add > Next.