Dulce Systems PRO DQxc - Manual (Page 6)

Page 11
PRO DQ g2 Installation and User’s Manual
3.3. Front, back and adapters
Front and Rear Views
Host Bus Extender Card for desktop
PressCard 34 Adapter for laptop
Uplink Port x1
Config
Switches
Uplink Port x8 Link Status:
Cable Installed
Power On
4 or 8 Lane
1
2
3
4
5
6
7
8
Mute Button
Config
Switches
Handle
Handle
Enclosure
Cooling Fan
Temp Alarm
Fan Alarm
Ethernet Port
Power Switch
Power is remotely
controlled by computer
Power Plug
Power Supply Fan
Disk Modules
Disk Modules
Uplink Port x1
Uplink Port x8
Page 12
PRO DQ g2 Installation and User’s Manual
4. Installation
Please follow these few steps to install the
about 20 minutes to complete.
Overview of installation:
• Disk Module Installation
• Host Bus Extender or ExpressCard
• Connections of Uplink cable
• Driver Installation
• RAID Console Installation
The PRO DQ is normally
pre-formatted for Apple Mac OS X. After the driver installation step
and a reboot, the PRO DQ
use.
Windows operation will require a format/partition process. The
DQ ship already pre-
simply run the Windows Disk Management ut
for Windows usage.
4.1. Disk Module Installation
Remove the front bezel. Install each marked Disk Module into the slot indicated.
Pull the Lock Pin to the right and insert drive tray fully, release Lock Pin to
secure.
Installation and User’s Manual
Please follow these few steps to install the PRO DQ. This process typically takes
minutes to complete.
Host Bus Extender or ExpressCard Adapter installation
Uplink cable to the Drive Enclosure
Installation
is normally shipped pre-configured in RAID 5 mode and
formatted for Apple Mac OS X. After the driver installation step
PRO DQ icon will appear on the desktop ready for
Windows operation will require a format/partition process. The PRO
-configured in RAID 5. After the driver installation,
simply run the Windows Disk Management utility to prepare the RAID
Disk Module Installation
Remove the front bezel. Install each marked Disk Module into the slot indicated.
Pull the Lock Pin to the right and insert drive tray fully, release Lock Pin to
his process typically takes
mode and
formatted for Apple Mac OS X. After the driver installation step
will appear on the desktop ready for
PRO
fter the driver installation,
ility to prepare the RAID
Remove the front bezel. Install each marked Disk Module into the slot indicated.