DJI Z15-5D - Manual (Page 4)

©2013 DJI Innovations. All Rights Reserved.
4
In Box
Gimbal & Gimbal Controller Unit (GCU)
Gimbal × 1
The Z15 gimbal has built-in slip rings within the mechanical structure,
which work to prevent the wire rod from entangling and enables
rotational freedom for the 3 axes rotating rods.
The gimbal has special built-in Z15 gimbal servo drive modules and
independent IMU module.
Gimbal Controller Unit (GCU) × 1
Connect the gimbal controller unit to the flight control system with a
CAN–Bus cable. The GCU will control the gimbal’s PAN, ROLL and
TILT axes rotation.
5D
Main Parts Package
Lens Retaining Ring × 1
For fixing the camera lens .
Mounting Bracket × 4
For the gimbal and landing gear connection.
Mounting Board for Receiver × 1
For fixing the GCU and providing the mounting position for the
receiver or other device.
Cable Clamp
For tidying the cables on gimbal.