DJI Ace Waypoint - Manual (Page 17)

©2012 DJI Innovations. All Rights Reserved. 17 |
B8
R/C Transmitter Calibration
In Assistant Software, page-TX MONITOR:
TX Totally 4 TX channels are required to be calibrate:
STEP1. Click [START] button, and move all of the sticks
throughout their complete range several times.
STEP2. Click [FINISH] button when you finished above
procedures.
1 You have to finish the throttle and pitch curve setting
before calibration, here the end-point of transmitter
sticks will be record.
2 If the throttle or pitch end-point of transmitter had
been changed, please calibrate it again.
STEP1