Decimator Design DMON-4S - Manual (Page 7)

DMON‐4S OPERATING MANUAL VERSION 1.0
Copyright © 2013 Decimator Design Pty Ltd, Sydney, Australia 7
M.V. (Multi‐Viewer) Routing: (Has SUB‐MENUs)
M.V. Routing
MV Audio Source
Input 1
Main Menu <==
Sub Menu
Parameter Window
When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right respectively through the 4 menus below and press the
BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.
1. M.V. Routing / Quad 1 Source (Parameter)
This is the input source for quadrant 1.
When the sub menu is highlighted, press ENTER to toggle through the following sources:
1.) Input 1
2.) Input 2
3.) Input 3
4.) Input 4
2. M.V. Routing / Quad 1 Source (Parameter)
This is the input source for quadrant 2.
When the sub menu is highlighted, press ENTER to toggle through the following sources:
1.) Input 1
2.) Input 2
3.) Input 3
4.) Input 4
3. M.V. Routing / Quad 1 Source (Parameter)
This is the input source for quadrant 3.
When the sub menu is highlighted, press ENTER to toggle through the following sources:
1.) Input 1
2.) Input 2
3.) Input 3
4.) Input 4
4. M.V. Routing / Quad 1 Source (Parameter)
This is the input source for quadrant 4.
When the sub menu is highlighted, press ENTER to toggle through the following sources:
1.) Input 1
2.) Input 2
3.) Input 3
4.) Input 4
Setup: (Has SUB‐MENUs)
Setup
LOAD DEFAULTS
Main Menu <==
Sub Menu
Parameter Window
When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right respectively through the 1 menus below and press the
BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.
1. SETUP / LOAD DEFAULTS (Action)
When highlighted in the Menu Window, press the ENTER button to load the default settings. The
device will be reset to the Main Menu Input Status.