Decimator Design DMON-4S User Manual

Page 4

4. Control / HDMI Out4 Type (Parameter)
This is the current HDMI output type for output 4.
This sub menu operates the same as Control / HDMI Out1 Type.

5. Control / HDMI Out1 Source (Parameter)
This is the current source for HDMI output 1.
When the sub menu is highlighted, press ENTER to toggle through the following sources:

1.) Input 1
2.) Input 2
3.) Input 3
4.) Input 4
5.) Multi‐View

6. Control / HDMI Out2 Source (Parameter)
This is the current source for HDMI output 2.
This sub menu operates the same as Control / HDMI Out1 Source.

7. Control / HDMI Out3 Source (Parameter)
This is the current source for HDMI output 3.
This sub menu operates the same as Control / HDMI Out1 Source.

8. Control / HDMI Out4 Source (Parameter)
This is the current source for HDMI output 4.
This sub menu operates the same as Control / HDMI Out1 Source.

9. Control / Loop 2 Enable (Parameter)
This enables a loop through copy of input 1 on BNC 2.
When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) No
2.) Yes

10. Control / Loop 4 Enable (Parameter)
This enables a loop through copy of input 3 on BNC 4.
When the sub menu is highlighted, press ENTER to toggle through the following selections:

1.) No
2.) Yes

11. Control / LCD OFF TIME (Parameter)
This is time taken for the LCD light to turn off after the last button press.
When the sub menu is highlighted, press ENTER to toggle through the following times:

1.) 5 seconds
2.) 15 seconds
3.) 30 seconds
4.) 1 minute
5.) 5 minutes
6.) 10 minutes
7.) 30 minutes
8.) Never

12. Control / BACK2STATUS TIME (Parameter)
This is time before the main menu is returned to Input Status after the last button press.
When the sub menu is highlighted, press ENTER to toggle through the following times:

1.) 5 seconds
2.) 15 seconds
3.) 30 seconds
4.) 1 minute
5.) 5 minutes