Decimator Design DMON-4S - Manual (Page 6)

DMON‐4S OPERATING MANUAL VERSION 1.0
Copyright © 2013 Decimator Design Pty Ltd, Sydney, Australia 6
5. Multi‐Viewer / Quad 1 Aspect (Parameter)
This is the aspect for quadrant 1.
When the sub menu is highlighted, press ENTER to toggle through the following aspects:
1.) Input = Output
2.) Letter/Pillar bx
3.) Centre Cut
6. Multi‐Viewer / Quad 2 Aspect (Parameter)
This is the aspect for quadrant 2.
When the sub menu is highlighted, press ENTER to toggle through the following aspects:
1.) Input = Output
2.) Letter/Pillar bx
3.) Centre Cut
7. Multi‐Viewer / Quad 3 Aspect (Parameter)
This is the aspect for quadrant 3.
When the sub menu is highlighted, press ENTER to toggle through the following aspects:
1.) Input = Output
2.) Letter/Pillar bx
3.) Centre Cut
8. Multi‐Viewer / Quad 4 Aspect (Parameter)
This is the aspect for quadrant 4.
When the sub menu is highlighted, press ENTER to toggle through the following aspects:
1.) Input = Output
2.) Letter/Pillar bx
3.) Centre Cut
9. Multi‐Viewer / Border Colour (Parameter)
This is border colour for the Multi‐Viewer.
When the sub menu is highlighted, press ENTER to toggle through the following colours:
1.) Black
2.) Blue
3.) Green
4.) Cyan
5.) Red
6.) Magenta
7.) Yellow
8.) White
10. Multi‐Viewer / No Signal Colour (Parameter)
This is the no signal colour for the Multi‐Viewer.
When the sub menu is highlighted, press ENTER to toggle through the following colours:
1.) Black
2.) Blue
3.) Green
4.) Cyan
5.) Red
6.) Magenta
7.) Yellow
8.) White