Decimator Design MD-CROSS User Manual
Page 9
MD‐CROSS OPERATING MANUAL VERSION 1.0
Copyright © 2013 Decimator Design Pty Ltd, Sydney, Australia
9
Each sub menu selects the audio pair source for the SDI and HDMI outputs.
Press ENTER to toggle to through the following selections for each sub menu:
1.) Group 1 Pair 1
(default for SDI Out Pair 1 and HDMI Out Pair 1)
2.) Group 1 Pair 2
(default for SDI Out Pair 2 and HDMI Out Pair 2)
3.) Group 2 Pair 1
(default for SDI Out Pair 3 and HDMI Out Pair 3)
4.) Group 2 Pair 2
(default for SDI Out Pair 4 and HDMI Out Pair 4)
5.) Group 3 Pair 1
(default for SDI Out Pair 5)
6.) Group 3 Pair 2
(default for SDI Out Pair 6)
7.) Group 4 Pair 1
(default for SDI Out Pair 7)
8.) Group 4 Pair 2
(default for SDI Out Pair 8)
9.) Off
Audio Meters:
(Has SUB‐MENUs)
Audio Meters
Group 1
Off
Main Menu
<==
Sub Menu
Parameter Window
When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right respectively through the 16 menus below and press
the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.
1. Audio Meter / Group 1 (Parameter)
This enables the audio meters overlay for group 1.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Off
2.) On
2. Audio Meter / Group 2 (Parameter)
This enables the audio meters overlay for group 2.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Off
2.) On
3. Audio Meter / Group 3 (Parameter)
This enables the audio meters overlay for group 3.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Off
2.) On
4. Audio Meter / Group 4 (Parameter)
This enables the audio meters overlay for group 4.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Off
2.) On
5. Audio Meter / Style (Parameter)
This is the audio meter style.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Vertical Bars
2.) Horizontal Bars
6. Audio Meter / Combination (Parameter)
This is the combination of either bar or float meters.
When the sub menu is highlighted, press ENTER to toggle through the following selections: