Decimator Design MD-CROSS - Manual (Page 11)

MD‐CROSS OPERATING MANUAL VERSION 1.0
Copyright © 2013 Decimator Design Pty Ltd, Sydney, Australia 11
14. Audio Meter / Green Start (Has SUB‐MENU with parameter)
This is the starting level for the green range on the audio meter. The value default is ‐20dBFS.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to increase and decrease the level respectively from 0 to ‐100dBFS.
Press the BACK button to leave this SUB‐MENU.
15. Audio Meter / Bar Thickness (Has SUB‐MENU with parameter)
This is the thickness of the audio meter. The value default is 6.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to decrease and increase the thickness respectively from 2 to 24.
Press the BACK button to leave this SUB‐MENU.
16. Audio Meter / Margin (Has SUB‐MENU with parameter)
This is the distance the audio meters are from the side of the screen. The distance is shown in
percentage of the screen resolution. The default value is 5%.
When the sub menu is highlighted, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to decrease and increase the thickness respectively from 0% to 25%.
Press the BACK button to leave this SUB‐MENU.
Graticules: (Has SUB‐MENUs)
Graticules
Safe Action
Off
Main Menu <==
Sub Menu
Parameter Window
When highlighted in the Main Menu, press the ENTER button to enter this sub‐menu.
Press the < and > buttons to move left or right respectively through the 18 menus below and press
the BACK button to go back to the Main Menu when finished.
The current value for each Sub Menu is shown in the Parameter Window.
1. Graticules / Safe Action (Parameter)
This enables the safe action graticule overlay.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Off
2.) On
2. Graticules / Safe Title (Parameter)
This enables the safe title graticule overlay.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Off
2.) On
3. Graticules / Centre Cross (Parameter)
This enables the centre cross graticule overlay.
When the sub menu is highlighted, press ENTER to toggle through the following selections:
1.) Off
2.) On
4. Graticules / Anamorphic (Action)
When the sub menu is highlighted, press ENTER to sets the graticule aspect to anamorphic.
5. Graticules / 16:9 LB on 4:3 (Action)
When the sub menu is highlighted, press ENTER to sets the graticule aspect to:
16:9 Letter‐box on a 4:3 Raster