CommScope ATC300-2000 - Manual (Page 5)

to return to the main screen.
3. Device search:
Click on Find Devices (Figure 2-2).
• Click on Start Scan on the Device Scan Progress screen (Figure 2-3).
• If an antenna/actuator has been removed or added to the site, a new scan is required.
• Firmware upgrades for Andrew devices may be recommended.
• Click on Close
Figure 2-3. Searching for Devices.
Bulletin 639572 • Revision F • December 2012 Page 5 of 7
ATC300-1000/2000 Teletilt® Control System Equipment Installation Overview