ClearCube M1020W-Series Engineering Workstation - Manual (Page 8)

Page 8 of 14 P/N G0200157 Rev E, 1.4.12.11.2014
ClearCube Technology, Inc. 3700 W Parmer Lane Austin, TX 78727 (512) 652-3500 www.clearcube.com
Rack Rails and Mounting,
Continued
Install inner
rail extensions The picture and table below show how to attach and secure the inner rail extensions.
Step Action
1 Align the hooks on the side of the chassis with the slots on the inner rail extension.
2 Slide the extension rail toward the front of the chassis.
3 Secure the extension rail with the screws provided.
4 Repeat these steps to attach the other extension rail on the other side of the chassis.
Next step: assemble outer rack rails.
Assemble outer
rack rails Outer rack rails consist of two sections: a longer front section and a shorter rear section. Slide these
together to assemble the rail.
Step Action
1 Identify the left and right outer rack rails by examining the ends (brackets). These
brackets bend outward as shown in “
Rack rail components
.”
2 Slide the front section of the outer rack rail into the rear outer rack rail as shown in
“
Rack rail components .”
3 Repeat these steps to assemble the other outer rack rail.
Next step: install outer rack rails in a rack.
Continued on next page
Step 1
Step 2
Step 3
Step 3