Calculated Industries 6270 User Guide - Manual (Page 9)

FINAL ASSEMBLY
The ultrasonic beams are sent from the right arm of
the Puck to the top bar, then refl ected back, and from
the left arm of the Puck to the side bar, then refl ected
back as shown above.
The Puck can be moved to any point within the bars
as long as the right arm remains parallel to the top
bar and the left arm remains parallel to the side bar
as shown above.
1. Insert the male end of the
fi rst Long Refl ector Bar
into the female end of the
Corner Connector.
1
1. Insert male end
of the Corner
Connector into
the female end of
the second Long
Refl ector Bar.
2
4. Insert the Male Bar
End Cap into the
female end of the fi rst
Long Refl ector Bar.
5
U
SER’S
G
UIDE
— 7
Left-Hand
Confi guration
2nd Long Refl ector Bar Short Refl ector Bar
1s
t L
on
g R
efl ect
or
B
ar
Right
Puck Arm
Left
Puck Arm