Calculated Industries 6260 User Guide - Manual (Page 35)

ARC LENGTH
ARC LENGTH WALL AREA
ARC AREA
ARC PERIMETER
ARC WALL AREA*
ARC HEIGHT*
ARC VOLUME*
4. Upon pressing
the [MEASURE]
key in Step-3, the
Arc measurement
was automatically
completed and
the Arc Area
displayed. Once an
Arc measurement
is completed, press
the D-Pad down
[6] to display Arc
Perimeter, Arc Wall
Area, Arc Volume
and stored Height.
Continuous presses
of the D-Pad down
[6] or up [5] will
scroll back and forth
through the values.
* Arc Wall Area, Arc
Volume and Height do
not display if a Height
has not been set. For this
example, a Height of
eight Feet was used. (See
Setting a Height section
for instructions on
setting a Height)
4
5. Press the D-Pad
right [4] to display
the Arc Length and
Arc Length Wall
Area. Continuous
presses of the
D-Pad right [4] will
scroll through these
values. Repeated
presses of the
D-Pad left [3] will
scroll back through
these values.
5
U
SER’S
G
UIDE
— 33