Calculated Industries 6135 - Manual (Page 7)

[LOCK] – Lock Switch
The Lock Switch is located on the side
of the unit. When the lock is activated, a
lock symbol will be displayed in the LCD.
While active you cannot alter Scales,
Modes, Units, Preferences or the
IMP/
MET
(Imperial/Metric) switch. You also
cannot perform a Clear All or a Software
Reset. It is advised to use the Scale Master
Pro XE in the locked position unless
you are specifically setting or changing
a setting.
Setup Keys
[MODE] – Mode Selection
Repeated presses of [MODE] will
scroll through the available modes. See
“Changing Modes” section.
[SUB] + [MODE] – Scrolls Back Modes
Holding [SUB] and repeated presses of
[MODE] will scroll backward through the
available modes.
[SCALE] – Scale Selection
Repeated presses of [SCALE] will
scroll through the available scales. See
“Changing Scales” section.
3 – Scale Master
®
Pro XE