Calculated Industries 6135 - Manual (Page 31)

Setting a Height
The height function is used to enter a height
value for finding volume.
To set a Height:
1) Press
[SET] [L] to access the height
function. The appropriate annunciator
will begin flashing “
FT IN ” for Imperial
mode or “ M ” for Metric mode. An “ H ”
will appear in the display.
2) To change the units of measurement,
press [UNITS] until your desired units
appear. Press the [W/LxW] ( X ) or the
[L] ( W ) key to begin setting the distance.
The selected digit will start flashing.
3) Press [M+] ( S ) to increase or [RCL] ( T )
to decrease the selected digit. Press the
[W/LxW] ( X ) key to move to the next
digit to the right or the [L] ( W ) key to
move back to the left.
4) Once the desired value has been entered,
press the [SET] key to save and exit.
Finding Area and Volume
The Scale Master Pro XE can calculate Area
and Volume once you have your values
set for Length, Width, and (for Volume)
Height.
27 – Scale Master
®
Pro XE