Entering a custom scale – Calculated Industries 6135 User Manual
Page 26
6) Press
[M+]
(
S
) to increase or
[RCL]
(
T
)
to decrease the selected digit. Press the
[W/LxW]
(
X
) key to move to the next
digit to the right or the
[L]
(
W
) key to
move back to the left.
7) Once the desired value has been entered,
press
[SET]
to store value and exit the
programming mode.
Note:
Pressing
[ON/CLEAR]
will exit the
programming mode without saving any value as
the Custom Scale.
Entering a Custom Scale
1) Press
[MODE]
until
# OPEN
(# being
a number 1-5) appears in the scale box
display.
2) Press
[SET] [SCALE]
. “
ROLL
” will appear
in the main display.
3) Press
[SCALE]
again. The annunciator
will begin flashing “
FT IN
” for Imperial
Mode. The left-most digit flashes
for
Metric Mode.
Note:
If in Metric Mode, skip to Step 5.
(cont’d)
22 – User’s Guide