Bosch maxx 800 Series - Manual (Page 24)

24
Troubleshooting of Minor Faults
d WARNING
TO AVOID
RISK OF ELECTRIC SHOCK!
Repairs should only be carried out
by an authorized technician.
If repairs are necessary, and you
cannot eliminate the fault yourself with
the aid of the following table:
q
Turn the program selector to Off.
q Disconnect the washing machine
from the power outlet.
q Turn off the water taps.
q Call Customer Service
(refer to Page 27).
Fault Possible cause Action
The door cannot be
opened.
Child lock activated. Deactivate child lock; (see Page 20) The door cannot be
opened.
Power failure. An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure,
call Customer Service (refer to Page 27).
Program is running and/or the door is locked for safety
reasons.
Wait until the program ends (see Page 21).
Plug is loose or not inserted. Eliminate the cause.
Program selector turned to Off before end of program. Select a program.
Door cannot be opened,
even though the appliance
Child lock activated. Deactivate child lock (see Page 20).
even though the appliance
has been switched off and
on again.
For safety reasons the door has been locked because the
water level, temperature or drum speed is too high.
See "Adding to the laundry/Interrupting the program",
Page 21 .
Program continues running,
even though the appliance
has been switched off and
on again.
Child lock activated. Deactivate child lock (see Page 20).
Appliance cannot be
operated. "Child lock
activated" as indicated in
the display field.
Child lock activated. Deactivate child lock (see Page 20).
Control lights do not light
up.
A fuse has blown. Reset circuit breaker. Control lights do not light
up.
A fuse has blown.
Call Customer Service if this fault recurs.
Power failure. An interrupted program will be resumed when power is
restored. If the laundry is to be removed during a power
failure,
call Customer Service (see page 27).
Program does not start.
Start/Pause indicator light
flashes.
Start/Pause button not pressed. Press the Start/Pause button.
Program does not start. Door not closed properly. Check whether laundry is trapped in door.
"Check Door !" indicated in
the display field. Close the door (a click should be heard).
Program continues.
Program does not start.
"Real Time delay" is
indicated in the display
field.
End time selected and activated. None. Appliance starts automatically.
Clock cannot be set. Program has already started; when a program has
started, the clock cannot be set.
Wait until program ends.
"Set clock:" text remains in
the display field even
though the
Menu button
has been pressed.
The setting has switched from hours to minutes; both
selection points have the same text.
None.