Washing with individual settings, Quick overview, Changing displayed settings – Bosch maxx 800 Series User Manual
Page 19
19
Washing with Individual Settings
The individual settings may be adjusted
to your requirements.
Below is a quick overview of the
adjustable settings.
The steps for changing the settings are
described in detail below.
Quick overview
Select a program with the program selector
Press the
Menu button (following selections appear in sequence)
Spin speed
Program finish
at time*
Washing
Mode
Reduced
Ironing
Pre
ĆSoak
Signal
Child lock
Set clock
Dependent on
program and
model
(see Page 18).
Adjustable
in 30 minute
steps
Normal
Quick
OFF
ON
OFF
ON
OFF
Continuous
Max
OFF
ON
Hours/
minutes
allows
reduction of the
maximum spin
speed achieved
by the program
allows the
program finish
time to be set
quick mode
for lighter
soiled items
and a shorter
wash time
a gentle spin
speed with
subsequent
fluffing to
reduce
creaasing
an integrated
pre-soak
cycle for pre-
treatment of
heavily
stained items
the acoustic
signal
indicates the
start or end of
the program,
operating
errors, or
malfunction
allows the washer
to be secured to
prevent certain
functions from
being changed
inadvertently
clock must be
set before the
program
option finish at
time can be
used
Press
Select button until desired setting is obtained
Press
Menu button for more settings
or press
Start/Pause button to begin washing
* Available only if clock is set (see page 13)
Changing Displayed Settings
i
Before setting additional options,
choose a program with the
program selector!
Select settings by pressing the
Menu
button and change them by pressing
the
Select button.
Select the option to be changed with
the Menu" button. Press the button to
move
to the next option on the display.
The active symbol starts flashing.
The current active option setting is
displayed on the right.
These settings can now be changed
with the Select" button. Press the
button to jump to the next possible
setting.
i
Pressing the Menu" button again,
saves the previous settings.
If you don't press any button for 10
seconds the settings are saved
automatically.