Bully Dog 51101 Rapid Flow Induction - Manual (Page 7)

6
RAPID FLOW INDuCTION
3. Connect the RFI tube up to the stock turbo
inlet hose. Use the stock band clamp to se-
cure the connection; this will require the
use of a flat head screw driver.
4. Installing the Mass Air Flow sensor:
• (‘03, ’04, ‘06, ‘07): Set the MAF (mass air
flow) sensor onto the RFI air outlet tube
in the same manner that it was installed
on the stock intake tube. Secure the MAF
sensor to the RFI using the stock toques
screws.
• 2005 The MAF sensor must be installed in a particular direction, the MAF sensor must be in-
stalled perpendicular to the flow of air to take a proper air flow reading. This is important to note
and will affect how well the vehicle runs after installation is complete. Set the MAF (mass air
flow) sensor onto the RFI air outlet tube in the same manner that it was installed on the stock
intake tube.