Bully Dog 81020 Rapid Flow - Manual (Page 8)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81020
6. Join together the Front Piece Tail Pipe
and the Tail Pipe Tip. Secure the connec-
tion with a clamp.
7. Hang the combined pieces from
Hangers C and D. Ensure that the
bend of the Front Piece Tail Pipe is
directly over the axle.
8. Install the Muffler by connecting
it into the Front Piece Tail Pipe and
then tightening Hanger C.
Hanger D
Front Piece Tail Pipe
Tail Pipe Tip
Hanger C
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk
You might have to adjust the hanger location to accommo-
date the muffler, use OEM pre-drilled holes..
9/16”
Hanger C
Front Piece Tail Pipe
Install front Piece Tail Pipe
Install Tail Pipe Tip