Bully Dog 81040 Rapid Flow - Manual (Page 8)

7
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81040
6. Hang the Front Piece Tail Pipe from
Hangers B and C. Ensure that the bend
of the Front Piece Tail Pipe is directly over
the axle.
7. Install the Tail Pipe Tip by tightening up
Hanger C enough to hold the Tail Pipe Tip
in place.
8. Install the Muffler by connecting it into
the Front Piece Tail Pipe and then tight-
ening Hanger C. Ensure that the levers are
pushing towards the front of the vehicle.
Hanger D
Hanger C
Front Piece Tail Pipe
Front Piece Tail Pipe
Hanger C
Tail Pipe Tip
Front Piece Tail Pipe
Muffler
SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk
Install Front Piece Tail Pipe
Install Tail Pipe Tip