Bully Dog 81040 Rapid Flow - Manual (Page 7)

6
6
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81040
2. Place all of the supplied Hang-
ers into their appropriate loca-
tions as shown in the above
diagram. Hanger A will hold
the Straight Pipe. Hanger B will
serve as both a hanger and a
clamp at the rear of the Muffler.
Hanger C will also serve as both
a hanger and a clamp between
the Front Piece Tail Pipe and the
Tail Pipe Tip.
3. Install the Adapter on the Catalytic Converter and secure with one of the supplied Clamps.
Cut Exhaust Directly in front of Band Clamp