Bully Dog 81420 Rapid Flow - Manual (Page 9)

8
8
rAPid FlOW inSTAllATiOn
rapid Flow exhaust # 81420
10. Install the Tail Pipe Tips by tightening up Hanger C
and D enough to hold the Tail Pipe Tips in place.
11. Install the Muffler by connecting it onto the Y Pipe
and then tightening Hanger B.
12. At this point it is time to install the
Straight Pipe. You will need to measure
the Straight Pipe to the correct length,
keeping in mind that you will need to
have an extra 3 inches of overlap when
you cut the pipe.
Tail Pipe Tip
Hanger D
Measure for the Straight
Pipe
Connect Muffler to Y Pipe
Install Tail Pipe Tip
Install Tail Pipe Tip
Hanger C
Driver Front Piece Tail Pipe
Muffler
Passenger Front Piece Tail Pipe
3”