Bully Dog 81420 Rapid Flow User Manual

Page 8

Text mode
Original mode

rAPid FlOW inSTAllATiOn

rapid Flow exhaust # 81420

6. Reinstall the Catalytic Converter and secure it by

bolting it to the flange on the Second Piece Down
Pipe .

7. Install the Adapter on the Catalytic Converter and

secure with one of the supplied Clamps.

8. Install the hanger bracket on the rear of the driv-

er’s side and hang Hanger C. The hanger bracket
will be secured to the frame of the truck using an
existing hole in the frame. The hole is on the lower
part of the frame as shown.

9. Install the Y Pipe by hanging it from Hanger B and

tightening it enough to hold the Y Pipe in place.

SwITCH DIRECTIONS: THE NEXT STEPS wILL BE FROM THE BACk OF THE TRUCk

Hanger B

Y-Pipe

Hanger Bracket Location

Install Front Piece Tail Pipe